Продавець Інтернет-магазин "Будинок Лампочки" розвиває свій бізнес на Prom.ua 9 років.
Знак PRO означає, що продавець користується одним з платних пакетів послуг Prom.ua з розширеними функціональними можливостями.
Порівняти можливості діючих пакетів
Кошик
378 відгуків

Зараз компанія не може швидко обробляти замовлення та повідомлення, оскільки за її графіком роботи сьогодні вихідний. Ваша заявка буде оброблена в найближчий робочий день.Робочий час: понеділок-п'ятниця 10:00/17:00.Відправка товарів з ВТ-ПТ (іноді СБ)

+380 (97) 630-46-64
Інтернет-магазин "Будинок Лампочки"
Кошик

Single-phase voltage stabilizer AMPERE U 9-1/16 v2.0

Ціну уточнюйте

Мінімальна сума замовлення на сайті — 500 грн

  • В наявності
  • Код: 217en
Single-phase voltage stabilizer AMPERE U 9-1/16 v2.0
Single-phase voltage stabilizer AMPERE U 9-1/16 v2.0В наявності
Ціну уточнюйте
+380 (97) 630-46-64
Менеджер
+380 (97) 630-46-64
Менеджер

Замовлення тільки за телефоном

повернення товару протягом 14 днів за домовленістю
Single-phase voltage stabilizer AMPERE U 9-1/16 v2.0

Single-phase voltage stabilizer "Ampere 9" is designed to operate in electrical networks with voltage fluctuations from 160 to 260V. In this range, the device is guaranteed to deliver a voltage at the output within 220 ± 4.5%, which is ensured through the use of 9 stabilization steps. The lineup of all listed Amperes in terms of power can be 2.2, 3.5, 5.5, 7, 9, 11, 14 and 18 kW, which corresponds to an operating current of 10, 16, 25, 32, 40, 50, 63 and 80A, respectively. The features of this stabilizer include silent operation due to the use of triacs (thyristors) as power switches and the presence of electronic transit (bypass). It is recommended to install and operate the Ampere stabilizer in dry and heated rooms. It is recommended to mount the wall in a vertical position (fans upwards), leaving 10-15cm at the top and bottom for cooling. The connection is made to the existing wiring through the terminal block.

Operating current, A 16
Rated power, kVA / kW 3.5
Number of stabilization steps 9
Key type triac
The efficiency of the stabilizer is not lower,% 98
Active power consumption at idle, no more, W 30
Nominal output voltage, V 220
Minimum operating input voltage, V 135
Adjustment of the lower threshold of shutdown, V no
Output voltage regulation, V no
Maximum input operating voltage, V 285
Stabilization accuracy,% 4.5
Response time to changes in input voltage, ms 20
Power supply frequency, Hz 45-65
Input Current and Apparent Power Measurement yes
Short-circuit and overload current limitation input circuit breaker with B-characteristic electromagnetic protection
Electronic Bypass no
Network and Stabilizer Condition Analyzer yes
Duplicate overvoltage protection yes
Microcontroller control yes
Input choke yes
Output choke no
Overheating protection yes
Minimum cable cross-section for connection, mm² -
Maximum cross-section of cable conductors for connection, mm² -
Forced Cooling two speed fan
Overall dimensions, mm, no more 400х235х145
Weight, kg, no more 13.5
Warranty, years 7
]]>
Характеристики
Основні
ВиробникЕлекс
Країна виробникУкраїна
Вихідний струм, не більше0 А
Гарантійний термін0 міс
Кількість фаз1
Габаритні розміри
Висота0 мм
Довжина0 мм
Ширина0 мм
Користувацькі характеристики
ДисплейДа
виготовленняНавісні
КатегоріяSingle phase stabilizers
Кількість щаблів (похибка, %)()
Країна реєстрації брендаУкраїна
Інформація для замовлення
  • Ціна: Ціну уточнюйте

Наскільки вам зручно на сайті?

Розповісти Feedback form banner